POWER SUPPLIES
100 - 240V 50/60Hz
Automatic power supply switching
INPUT POWER
1050VA at 230V 50Hz (PFC electronic ballast)
LIGHT SOURCE
700 W discharge lamp:
- Cap: PGjX28
- Color Temperature: 7,200 K
- Luminous Flux: 50,000 lm
- Average Life: 750 h
OPTICS
Elliptic reflector with high luminous efficiency
Electronic linear zoom 9°-50°
Motorized Top Hat, for a perfect beam control
COLOR SYSTEM
CMY Color Mixing
Linear CTO
Color Wheel with 8 pure and selected color filters + open
CTB filter (on color wheel)
EFFECTS SECTION
Adjustable Beam Shaper (banana effect)
Adjustable "Diamond tip" lens ("X" shape)
Motorized system to zoom the beam shaper and “diamond tips" effects
A new conception 0-100% Dimmer + dimmer fine on dedicated channel.
Stop/strobe effect
CONTROL AND PROGRAMMING
Max 21 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Art-Net / RDM
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Dimmer Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input
BODY
Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
PAN and TILT lock for transport and maintenance.
MOVING BODY
Angle:
- PAN = 540°, TILT = 250°
Max Speeds:
- PAN = 3.20 sec (Normal Mode) - 2.90 sec (Fast Mode)
- TILT = 1.89 sec (Normal Mode) - 1.75 sec (Fast Mode)
Resolution:
- PAN = 2.11°, PAN FINE = 0.008°
- TILT = 0.98°, TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.
ELECTRONICS
Long life self-charging buffer battery.
Pre-set macros.
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"AUTOTEST" function from menù
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware Upgrade with no power
Firmware upload from another fixture
SAFETY DEVICES
Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.
WORKING POSITION
Functions in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base
CE MARKING
In conformity with the European Directives:
• 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD)
• 2014/30/EU - Electromagnetic Compatibility (EMC)
• 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS)
• 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP)
ETL
This product is available, on demand, with cETLus Listed Mark, that complies with the UL 1573 and CSA C22.2 No. 166 standards.
WEIGHT
20,6 Kg (45 lbs 5 ozs)