Link to Official Page

 

Lumina inteligenta de la Clay Paky, Super sharpy, este disponibila pentru inchiriere

 

After the Sharpy’s extraordinary worldwide success, Clay Paky is now launching the Supersharpy, an ACL beam type moving head featuring a 470 watt lamp. If you have been amazed at how bright the Sharpy is, the Supersharpy will leave you literally stunned. Its light beam is nothing short of three times brighter, with a far bigger difference than you would expect by simply comparing the rated wattage of the two lamps (470 vs 190). Thanks to this incredible output, the Supersharpy’s light reaches never-seen-before mid-air distances, making the Supersharpy the first low-wattage beam light that can really challenge a searchlight.

However Clay Paky has not settled for merely producing a “more powerful beam light”. The Supersharpy also provides the utmost in terms of light quality and number of effects.

 

  • 470W discharge lamp (new version)
  • Three times brighter than the Sharpy
  • Large 170mm diameter front lens
  • Adjustable beam angle from 0 to 4°
  • Extremely Advanced optics: perfectly focused images projections even tens of metres away
  • CMY mixing system with gradually fading color wheels
  • 14 special color filters on three wheel
  • 2 CTO filters (3,200 K and 2,500 K) to create even the “warmest” shades. 1 CTB filter.
  • Wheel with 7 HQ dichroic rotating gobos
  • Wheel with 18+1 fixed metal gobos (including beam diameter reducers)
  • 8-facet Rotating prism
  • Frost unit to simulate a wash projection
  • High Precision dimmer and stop-strobe effect
  • Rapid and extensive pan and tilt movements
  • New, high-performance electronics
  • Art-Net / RDM
  • Patented Italian design

Super Sharpy

SKU: 0008
  • POWER SUPPLIES

    AC power input Neutrik PowerCON TRUE1 (IP65)
    115/230V 50/60 Hz
    Automatic power supply switching

    INPUT POWER

    700VA at 230V 50Hz

    LIGHT SOURCE

    470W discharge lamp
    - Type: New MSD Platinum 20RB
    - Life: 1,500hrs
    - Luminoux flux: 23,000 lm
    - Cap by faston Tyco 187 (4,8 mm)

    OPTICS

    170mm diam. front lens
    0-4° Adjustable beam angle
    Electronic Focusing

    COLOR SYSTEM

    CMY color system based on 3 gradually fading color wheels
    14 color filters on three wheels
    2 CT0 filters (3,200K and 2,500K) + 1 CTB filter

    EFFECTS SECTION

    2 gobo wheels
    - wheel with 7 HQ dichroic, indexable and interchangeable rotating gobos.
    - interchangeable and variable rotation wheel with 18+1 fixed metal gobos (including 6 beam reducers).
    Selectable gobo-shake function
    Interchangeable 8-facet Prism
    Frost unit to soften the beam edge
    0-100% Mechanical dimmer
    Mechanical shutter and adjustable speed strobe effect

    CONTROL AND PROGRAMMING

    24/28 DMX 512 control channels
    DMX protocol signal: USITT DMX 512
    Art-Net / RDM
    Display: Graphic LCD backlit b/w Display 
    Pan/Tilt Resolution: 16 bit
    Gobo Indexing Resolution: 16 bit
    Focus Indexing Resolution: 8 bit
    Dimmer Resolution: 16 bit
    Movement control: vectorial
    DMX signal connection: 5 pole XLR input and output
    Software upload through DMX input

    BODY

    Aluminium structure with die-cast plastic cover.
    Two side handles for transportation.
    Device locking PAN and TILT mechanisms for transportation and maintenance.

    MOVING BODY

    Angle:
    - PAN = 540° - TILT = 244°
    Resolution:
    - PAN = 2.11° - PAN FINE = 0.008°
    - TILT = 0.96° - TILT FINE = 0.004°
    Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

    ELECTRONICS

    Long life self-charging buffer battery.
    Function reset from control unit
    "ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
    ON/OFF lamp control from the lighting desk.
    Function reset from the lighting desk.
    "AUTOTEST" function from menù
    Electronic monitoring with status error
    Cooling system monitoring
    DMX level monitoring on all channels
    Internal data transmission diagnostics
    Firmware Upgrade with no power
    Firmware upload from another fixture

    SAFETY DEVICES

    Bipolar circuit breaker with thermal protection.
    Automatic break in power supply in case of overheating or failed operation of cooling system.
    Forced ventilation with axial fans.

    WORKING POSITION

    Any Working Position
    Hanging system: with fast-lock omega clamps (1/4 turn) on the base

    CE MARKING

    In conformity with the European Directives:
    • 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD)
    • 2014/30/EU - Electromagnetic Compatibility (EMC)
    • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS)
    • 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP)

    WEIGHT

    30 Kg (66 lbs)